Application
Special features
High induction results in a rapid reduction of the supply air to room air temperature difference and airflow velocity
Nominal sizes
Variants
Connection
Q-*-H: Square plenum box with horizontal duct connection
R-*-H: Circular plenum box with horizontal duct connection
V: Vertical duct connection
Accessories
Lip seal
Attachments
Construction features
Materials and surfaces
Standards and guidelines
Maintenance
Ceiling swirl diffusers in air conditioning systems create a swirl to supply air to rooms. The resulting airflow induces high levels of room air, thereby rapidly reducing the airflow velocity and the temperature difference between supply air and room air. Ceiling swirl diffusers allow for large volume flow rates. The result is a mixed flow ventilation in comfort zones, with good overall room ventilation, creating only very little turbulence in the occupied zone.
Type TDF ceiling swirl diffusers have fixed blades. Air discharge is horizontal radial. The supply air to room air temperature difference can be -12 to +10 K. A damper blade (optional) simplifies volume flow rate balancing for commissioning. Pressure tap and cord-operated damper blade (optional) allow for volume flow rate balancing with the diffuser face in place. To give rooms an aesthetic, uniform look, type TDF diffusers may also be used for extract air.
Nominal sizes | 300, 400, 500, 600, 625 mm |
Minimum volume flow rate, with Δtz = -6 K | 10 – 42 l/s or 36 – 151 m³/h |
Maximum volume flow rate, with LWA ≅ 50 dB(A) | 80 – 265 l/s from 288 – 954 m³/h |
Supply air to room air temperature difference | -12 – 10 K |
Specification text
Ceiling swirl diffusers with square or circular diffuser face. Supply air and extract air variants for comfort zones. Diffuser face with fixed air control blades for horizontal swirling supply air discharge creating high induction levels. For installation in suspended ceilings of all kinds. Ready-to-install component which consists of the diffuser face and a plenum box, side entry or top entry spigot, and suspension holes or suspension brackets.
Special features
High induction results in a rapid reduction of the supply air to room air temperature difference and airflow velocity
Materials and surfaces
Technical data
TDF-SA | – | Q | – | Z | – | H | – | M | – | L | / | 500 | / | P1 - RAL … |
| | | | | | | | | | | | | | | | |||||||
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Style | Square |
Air conditioning system | Supply air |
Connection on | Vertical |
Damper unit for volume flow rate balancing | With |
Accessories | Lip seal |
Nominal size | 500 |
Exposed surface | RAL 9016, traffic white, gloss level GU70 |
Sdílet stránku
Doporučit tuto stránku
Doporučit tuto stránku zasláním odkazu emailem.
Sdílet stránku
Děkujeme za doporučení!
Vaše doporučení bylo odesláno a zakrátko by mělo být doručeno.
Kontakt
Jsme tu pro vás
Uveďte prosím své sdělení a druh dotazu
Tel.: +420 283 880 380 | Fax: +420 286 881 870
Kontakt
Děkujeme vám za zprávu!
Vaše zpráva je odeslána a zakrátko bude zpracována.
Naše oddělení pro servisní dotazy se s vámi co nejrychleji spojí Pro obecné informace o výrobcích nebo o službách můžete také zavolat:
Tel.: +420 283 880 380 | Fax: +420 286 881 870
Kontakt
Jsme tu pro vás
Uveďte prosím své sdělení a druh dotazu
Tel.: +420 283 880 380 | Fax: +420 286 881 870
Kontakt
Děkujeme vám za zprávu!
Vaše zpráva je odeslána a zakrátko bude zpracována.
Naše oddělení pro servisní dotazy se s vámi co nejrychleji spojí Pro obecné informace o výrobcích nebo o službách můžete také zavolat:
Tel.: +420 283 880 380 | Fax: +420 286 881 870