00136579_0
Shut-off damper Type AK-Ex


00135111_0
ATEX-Zertifizierung


00130917_0
ATEX-compliant parts and units


00136579_0
00135111_0
00130917_0

AK-EX 

FOR LOW-LEAKAGE SHUT-OFF OF VOLUME FLOWS IN POTENTIALLY EXPLOSIVE ATMOSPHERES (ATEX)

Circular shut-off dampers for shutting off ducts, approved and certified for potentially explosive atmospheres (ATEX)

  • ATEX-compliant construction and parts
  • Approved for all gases, mists and vapours in zones 1 and 2, with electric actuator additionally for dusts in zones 21 and 22
  • Suitable for supply air and extract air
  • Electric or pneumatic actuator
  • Any installation orientation
  • Closed blade air leakage to EN 1751, up to class 4
  • Casing air leakage to EN 1751, class C


Optional equipment and accessories

  • Spring return actuator
  • Auxiliary switch with adjustable switching points for capturing the end positions

General information

Application

  • Circular EXCONTROL shut-off dampers Type AK-Ex for shutting off or restricting the airflow in ventilation ducts of air conditioning systems
  • For use in potentially explosive atmospheres (ATEX)
  • Input signal to control shut-off damper blade is to be provided by others

Special features

  • ATEX mark and certification
  • ATEX equipment group II, approved for use in zones 1 and 2; electric actuator also for zones 21 and 22


Nominal sizes

  • 125, 160, 200, 250, 315, 400


Construction

  • Galvanised sheet steel
  • P1: Inner duct powder-coated, silver grey (RAL 7001)
  • A2: Inner duct in stainless steel

Parts and characteristics

  • Ready-to-install shut-off damper
  • Damper blade with blade mechanism
  • Connection for equipotential bonding
  • Cable bushings suitable for use in potentially explosive atmospheres
  • ATEX-compliant actuator is factory assembled and wired

Attachments

  • Electronic actuator:
  • Auxiliary switch for capturing the end positions
  • Pneumatic actuator

Construction features

  • Circular casing
  • Construction and materials comply with the EU directive for use in potentially explosive atmospheres (ATEX)
  • Spigot with lip seal, for circular connecting ducts to EN 1506 or EN 13180


Technical data

  • Nominal sizes: 125 – 400 mm
  • Acceptable static differential pressure: 1500 Pa

Standards and guidelines

  • Directive 94/9/EC: Equipment and protective systems intended for use in potentially explosive atmospheres
  • Closed blade air leakage to EN 1751, class 4 (nominal sizes 100 and 160, class 3)
  • Nominal sizes 125 and 160 meet the general requirements, nominal sizes 200 – 400 meet the increased requirements of DIN 1946, part 4, with regard to the acceptable closed blade air leakage
  • Casing air leakage to EN 1751, class C

Maintenance

  • Maintenance-free as construction and materials are not subject to wear

Technické údaje

  • FUNCTION
  • TECHNICAL DATA
  • SPECIFICATION TEXT
  • ORDER CODE
Schematic illustration of the AK-Ex with electronic control
00137446_0
① Cover
② Auxiliary switch
③ Electric actuator
④ Terminal box
⑤ Cable bushing
⑥ Equipotential bonding
⑦ Damper blade


00137446_0
00137447_0

Nominal sizes

125 – 400 mm

Acceptable static differential pressure

1500 Pa

Operating temperature

10 – 50 °C


Electronic

Supply voltage

24 – 230 V AC ± 10 %, 50/60 Hz

Power rating

120 VA max.

IEC protection class

I (protective earth)

Protection level

IP 42

EC conformity

ATEX to 2014/34/EU, EMC to 2014/30/EU, low voltage to 2014/35/EU


Pneumatic

Control pressure

0 – 1.2 bar

Maximum pressure

1.5 bar

Compressed air

Compressed air for instruments, free of oil, water and dust

Protection level

IP 42

Air consumption (100 % stroke)

0.3 l/n (nominal sizes 125 – 250) to 0.5 l/n max. (nominal size 315 – 400)

EC conformity

ATEX to 2014/34/EU


This specification text describes the general properties of the product. Texts for variants can be generated with our Easy Product Finder design programme.


Circular shut-off dampers for shutting off or restricting the airflow in potentially explosive atmospheres, for supply air or extract air, available in 6 nominal sizes.

Suitable for duct pressures up to 1500 Pa.

Ready-to-install unit consists of the casing with damper blade, and parts for equipotential bonding and for use in potentially explosive atmospheres.

Spigot with lip seal, for circular connecting ducts to EN 1506 or EN 13180.

Closed blade air leakage to EN 1751, class 4 (nominal sizes 125 and 160, class 3).

Casing air leakage to EN 1751, class C.

Special features

  • ATEX mark and certification
  • ATEX equipment group II, approved for use in zones 1 and 2; electric actuator also for zones 21 and 22

Materials and surfaces

  • Casing and damper blade made of galvanised sheet steel
  • Blade seal made of TPE plastic
  • Plain bearings made of polyurethane
  • Electric actuator made of die cast aluminium
  • Pneumatic actuator made of plastic
  • Inner tube either made of stainless steel 1.4301 (A2) or powder-coated (P1)

Construction

  • Galvanised sheet steel
  • P1: Inner duct powder-coated, silver grey (RAL 7001)
  • A2: Inner duct in stainless steel

Technical data

  • Nominal sizes: 125 – 400 mm
  • Acceptable static differential pressure: 1500 Pa

Sizing data

  • qᵥ [m³ /h]
Air-regenerated noise
  • LPA [dB(A)]

1 Type
AK-Ex Shut-off damper for potentially explosive atmospheres


2 Material
No entry: galvanised sheet steel
P1 Inner duct powder-coated, RAL 7001 (silver grey)
A2 Inner duct in stainless steel


3 Nominal size [mm]
125, 160, 200, 250, 315, 400


4 Actuator
Electric
T0S Actuator
T0F Spring return actuator
T0X Actuator with auxiliary switch
T0Y Spring return actuator with auxiliary switch


Pneumatic
P50 Actuator


5 Damper blade position
Only with spring return actuator or pneumatic actuator
NO pressure off/power off to OPEN (Normally Open)
NC power off/pressure off to CLOSE (Normally Closed)


Stažení

informace o produktu

  • Product data sheet Type AK-Ex

    AK-Ex_PD_2023_11_15_DE_en Product data sheet 440 KB pdf

  • Typ AK-Ex

    K5 – 3.1 – 27 1,1 MB pdf

certifikáty

  • Certificate concerning statistical leakage tests

    LC_v2_2024_10_DE_en Certificate  650 KB pdf

  • Certificate concerning statistical leakage tests

    LC_v1_2024_10_DE_en Certificate  660 KB pdf

  • Declaration of conformity or declaration of incorporation Type AK-Ex

    CE_2019_08_AK-Ex_de_en_fr Declaration of conformity or declaration of incorporation 63 KB pdf

  • Declaration of hygiene conformity Type AK-Ex

    AK-Ex_HC_2024_05_DE_en Hygiene certificate 1,8 MB pdf

  • EC Declaration of conformity  

    CE_2015_03_AK-Ex_DE_de_en_fr.pdf Certificate 540 KB pdf

návody k obsluze

  • Operating and Installation Manual

    IOM_2017_03_AK-Ex_DE_en Operating and Installation Manual 1,2 MB pdf

TROX SERVIS

production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Sdílet stránku

Doporučit tuto stránku

Doporučit tuto stránku zasláním odkazu emailem.

Pole označená (*) jsou povinná.

Sdílet stránku

Děkujeme za doporučení!

Vaše doporučení bylo odesláno a zakrátko by mělo být doručeno.


Kontakt

Jsme tu pro vás

Uveďte prosím své sdělení a druh dotazu
Tel.: +420 283 880 380 | Fax: +420 286 881 870

Attachment (max. 10MB)
Vaše zpráva
Vaše zpráva pro

Pole označená (*) jsou povinná.

Kontakt

Děkujeme vám za zprávu!

Vaše zpráva je odeslána a zakrátko bude zpracována.
Naše oddělení pro servisní dotazy se s vámi co nejrychleji spojí Pro obecné informace o výrobcích nebo o službách můžete také zavolat:
Tel.: +420 283 880 380 | Fax: +420 286 881 870

Kontakt

Jsme tu pro vás

Uveďte prosím své sdělení a druh dotazu
Tel.: +420 283 880 380 | Fax: +420 286 881 870

Attachment (max. 10MB)
Vaše zpráva
Vaše zpráva pro

Pole označená (*) jsou povinná.

Kontakt

Děkujeme vám za zprávu!

Vaše zpráva je odeslána a zakrátko bude zpracována.
Naše oddělení pro servisní dotazy se s vámi co nejrychleji spojí Pro obecné informace o výrobcích nebo o službách můžete také zavolat:
Tel.: +420 283 880 380 | Fax: +420 286 881 870

TROX Logo
Kliknutím na tlačítko nám umožníte, abychom Vám poskytli vynikající zážitek z webových stránek a snadné nákupní procesy. Tyto soubory cookie zahrnují ty, které jsou nezbytné pro provoz stránek a pro kontrolu našich služeb a aplikací, stejně jako ty, které se používají pouze pro statistické účely, pro pohodlné nastavení nebo pro zobrazení personalizovaného obsahu. Můžete se rozhodnout, které kategorie chcete povolit, a můžete upravit nastavení využití dat podle svých individuálních požadavků. Upozorňujeme, že v závislosti na nastavení, které jste vybrali, nemusí být všechny funkce stránky k dispozici. Svůj výběr můžete kdykoli změnit.
Cookie settings