00136633_0
KA-EU
00132715_0
Tested to VDI 6022
00131632_0
Capillary tube sensor
00136640_0
KA-EU with electric blade opening actuator
00136633_0
00132715_0
00131632_0
00136640_0

KA-EU       

FOR THE EXTRACT AIR OF COMMERCIAL KITCHENS

Rectangular fire damper for use in extract air and exhaust air ducts of commercial kitchens. For the isolation of duct penetrations between fire compartments, available in 16 nominal sizes

  • Nominal sizes from 250 × 225 to 1200 × 500 mm
  • 100% free area ensures maximum safety
  • No differential pressure, low sound power level
  • Easy to clean
  • Integration into the central BMS with TROXNETCOM


Optional equipment and accessories

  • Electric blade opening actuator, 230 V
  • Control module

Application

Application

  • Fire dampers of Type KA-EU for shutting off extract air and exhaust air ducts of commercial kitchens, with general building inspectorate licence
  • To prevent the propagation of fire and smoke through ductwork to adjacent designated fire compartments

Special characteristics

  • General building inspectorate licence Z-41.3-692
  • Tested for fire resistance properties to DIN 4104-6 and EN 1366-2
  • 100% free area
  • Low differential pressure and sound power level
  • Integration into the central BMS with TROXNETCOM

Classification

  • Fire resistance class K90to DIN 4102-6

Nominal sizes

  • 250 × 225 to 1200 × 500 mm
  • L: 595 – 880 mm (depending on the selected casing height)

Description

Variants

  • With thermal release mechanism
  • With thermal release mechanism and control module
  • With electric blade opening actuator and control module

Parts and characteristics

  • Installation in horizontal or vertical ducts
  • Installation in horizontal ducts with the damper blade at the top and airflow in any direction
  • 100% free area, hence low differential pressure
  • Secure closure by means of gas struts even when there are deposits
  • Release temperature 72 °C

Attachments

  • Capillary tube sensor

Construction features

  • Rigid rectangular casing with installation subframe
  • Connecting flanges with fixing holes on both sides, suitable for duct connection
  • Scrapers on the damper blade to scrape off greasy deposits etc.
  • Damper blade outside of the airflow
  • Remote control with electric blade opening actuator

Materials and surfaces

Casing:

  • Galvanised sheet steel
  • Stainless steel 1.4301


Damper blade:

  • Special insulation material faced with stainless steel


Other components:

  • Damper blade shafts made of galvanised steel or stainless steel

Standards and guidelines

  • EN 1366-2:1999 Fire resistance tests for service installations – Fire dampers
  • DIN 4102-6, standard fire resistance test
  • EN 1751 Ventilation for buildings – Air terminal devices
  • VDI 2052 Ventilation equipment for kitchens

Maintenance

  • The functional reliability of the fire damper must be tested at least every six months; this has to be arranged by the owner of the ventilation system; functional tests must be carried out in compliance with the basic maintenance principles stated in EN 13306 and DIN 31051. If two consecutive tests, one 6 months after the other, are successful, the next test can be conducted one year later.
  • A functional test involves closing the damper blade and opening it again; with electric blade opening actuator this can be done via remote control
  • Fire dampers must be included in the regular cleaning schedule of the ventilation system.
  • For details on maintenance and inspection refer to the installation and operating manual

Technické údaje

  • Function
  • Technology
  • Quick sizing
  • Specification text
  • Order code
Schematic illustration of KA-EU
00132937_0

① Mounting plate
② Spring tab
③ Limit switch for damper blade position CLOSED
④ Limit switch for damper blade position OPEN
⑤ Electromagnet
⑥ Damper blade with scraper
⑦ Casing
⑧ Gas strut
⑨ Fixing tab
⑩ Setting lever

00132937_0
00132941_0
Construction for manual operation

Functional description

In the event of a fire, fire dampers shut automatically to prevent the propagation of fire and smoke through ductwork to adjacent designated fire compartments. When in the event of a fire the temperature rises to 72 °C, a capillary tube sensor interrupts the power supply to the electromagnet, and the damper blade is released. While power is being supplied to the electromagnets, the fire damper can be opened with the blade opening lever. The release mechanism is accessible and can be tested from the outside.

Construction with electric blade opening actuator

Functional description

In the event of a fire, fire dampers shut automatically to prevent the propagation of fire and smoke through ductwork to adjacent designated fire compartments. When in the event of a fire the temperature rises to 72 °C, a capillary tube sensor interrupts the power supply to the electromagnet, and the damper blade is released. While power is being supplied to the electromagnets, the fire damper can be opened with the blade opening lever. The release mechanism is accessible and can be tested from the outside.

Nominal sizes250 × 225 – 1200 × 500 mm
Volume flow rate rangeUp to 6000 l/s or 21600 m³/h
Operating temperature10 to 50 °C
Release temperature72 °C


Quick selection

Duct dimensions B × H in mmVolume flow rate V [l/s]Volume flow rate V [m³/h]
Duct dimensions B × H in mmAirflow velocity vA [m/s]
Duct dimensions B × H in mm56789105678910
250 × 225280340390450505560100812241404162018182016
300 × 225340410470540610675122414761692194421962430
300 × 300450540630720810900162019442268259229163240
400 × 30060072084096010801200216025923024345638884320
400 × 4008009601120128014401600288034564032460851845760
500 × 400100012001400160018002000360043205040576064807200
600 × 400120014401680192021602400432051846048691277768640
700 × 4001400168019602240252028005040604870568064907210080
500 × 500125015001750200022502500450054006300720081009000
600 × 5001500180021002400270030005400648075608640972010800
700 × 500175021002450280031503500630075608820100801134012600
800 × 5002000240028003200360040007200864010080115201296014400
900 × 5002250270031503600405045008100972011340129601458016200
1000 × 50025003000350040004500500090001080012600144001620018000
1100 × 50027503300385044004950550099001188013860158401782019800
1200 × 500300036004200480054006000108001296015120172801944021600


Square or rectangular fire dampers for the isolation of extract air or exhaust air duct penetrations in commercial kitchens. With flanges for installation in horizontal or vertical ducts. Secure closure by means of gas struts even when there are deposits.

Tested for fire resistance properties to DIN 4102-6 and EN 1366-2, fire resistance class K90; casing made of sheet steel, stainless steel as an option. Low-leakage damper blade made of special insulation material faced with stainless steel. Scrapers on the damper blade to scrape off greasy deposits etc. Thermal release mechanism 72 °C. Two electric limit switches for capturing damper blade positions CLOSED and OPEN as well as for switching the fan off; electric blade opening actuator and control module as options. For mortar-based installation into solid walls and ceiling slabs, and into lightweight partition walls and fire walls with metal support structure and cladding on both sides.

Special characteristics

  • General building inspectorate licence Z-41.3-692
  • Tested for fire resistance properties to DIN 4104-6 and EN 1366-2
  • 100% free area
  • Low differential pressure and sound power level
  • Integration into the central BMS with TROXNETCOM

Materials and surfaces

Casing:

  • Galvanised sheet steel
  • Stainless steel 1.4301


Damper blade:

  • Special insulation material faced with stainless steel


Other components:

  • Damper blade shafts made of galvanised steel or stainless steel

Technical data
  • Nominal sizes: 250 × 225 – 1200 × 500 mm
  • Volume flow rate range: up to 6000 l/s or 21600 m³/h
  • Operating temperature: 10 to 50 °C
  • Release temperature: 72 °C

00132947_0

 Type
KA-EU       Fire damper for the extract air of commercial kitchens

 Material
       No entry: galvanised casing
2       Stainless steel 1.4301

 

 Country of destination
DE       Germany
       Other destination countries upon request

 Nominal size [mm]
       B × H × L

 Attachments
Z00       Standard construction
Z01       With control module
Z02       With electric blade opening actuator and control module

 

Stažení

informace o produktu

  • Technical leaflet 

    06/2015 Type KA-EU 850 KB pdf
production {"x-frame-options"=>"SAMEORIGIN", "x-xss-protection"=>"1; mode=block", "x-content-type-options"=>"nosniff", "x-download-options"=>"noopen", "x-permitted-cross-domain-policies"=>"none", "referrer-policy"=>"strict-origin-when-cross-origin", "strict-transport-security"=>"max-age=31536000; includeSubDomains", "content-type"=>"text/html; charset=utf-8"}

Sdílet stránku

Doporučit tuto stránku

Doporučit tuto stránku zasláním odkazu emailem.

Pole označená (*) jsou povinná.

Sdílet stránku

Děkujeme za doporučení!

Vaše doporučení bylo odesláno a zakrátko by mělo být doručeno.


Kontakt

Jsme tu pro vás

Uveďte prosím své sdělení a druh dotazu
Tel.: +420 283 880 380 | Fax: +420 286 881 870

Vaše zpráva
Vaše zpráva pro

Pole označená (*) jsou povinná.

Kontakt

Děkujeme vám za zprávu!

Vaše zpráva je odeslána a zakrátko bude zpracována.
Naše oddělení pro servisní dotazy se s vámi co nejrychleji spojí Pro obecné informace o výrobcích nebo o službách můžete také zavolat:
Tel.: +420 283 880 380 | Fax: +420 286 881 870

Kontakt

Jsme tu pro vás

Uveďte prosím své sdělení a druh dotazu
Tel.: +420 283 880 380 | Fax: +420 286 881 870

Attachment (max. 10MB)
Vaše zpráva
Vaše zpráva pro

Pole označená (*) jsou povinná.

Kontakt

Děkujeme vám za zprávu!

Vaše zpráva je odeslána a zakrátko bude zpracována.
Naše oddělení pro servisní dotazy se s vámi co nejrychleji spojí Pro obecné informace o výrobcích nebo o službách můžete také zavolat:
Tel.: +420 283 880 380 | Fax: +420 286 881 870

TROX Logo
Kliknutím na tlačítko nám umožníte, abychom Vám poskytli vynikající zážitek z webových stránek a snadné nákupní procesy. Tyto soubory cookie zahrnují ty, které jsou nezbytné pro provoz stránek a pro kontrolu našich služeb a aplikací, stejně jako ty, které se používají pouze pro statistické účely, pro pohodlné nastavení nebo pro zobrazení personalizovaného obsahu. Můžete se rozhodnout, které kategorie chcete povolit, a můžete upravit nastavení využití dat podle svých individuálních požadavků. Upozorňujeme, že v závislosti na nastavení, které jste vybrali, nemusí být všechny funkce stránky k dispozici. Svůj výběr můžete kdykoli změnit.
Cookie settings