00136676_0
Duct smoke detector RM-O-VS-D
00132715_0
Tested to VDI 6022
00132450_0
With TROXNETCOM as an option
00136676_0
00132715_0
00132450_0

RM-O-VS-D 

For smoke detection in ducts with integrated airflow monitoring

Duct smoke detector with airflow monitoring function to prevent smoke from spreading through the ducts of ventilation and air conditioning systems

  • To provide the control input signal for fire dampers
  • To provide the control input signal for smoke protection dampers
  • For airflow velocities up to 20 m/s
  • For any airflow direction
  • Contamination level indicator
  • Automatic adjustment of the alarm threshold, hence long service life and little requirement for maintenance
  • Volt-free signal and alarm relays
  • Airflow monitor


Optional equipment and accessories

  • Integration into the central BMS with TROXNETCOM

Application

Application

  • Duct smoke detectors of Type RM-O-VS-D are used to control fire dampers and smoke protection dampers with electric or electric-pneumatic release mechanisms (power off to close)
  • Control of smoke protection dampers with electric spring return actuators
  • Used to prevent smoke from spreading through the ducts of ventilation and air conditioning systems
  • Integration into the central BMS with TROXNETCOM

Special characteristics

  • Smoke detection based on the principle of light scattering
  • For airflow velocities from 1 to 20 m/s
  • Airflow monitoring
  • With volt-free signal and alarm relays
  • Integral signal lamps
  • Choice of four airflow directions (every 90°)
  • Easily removable sensor head (simplifies functional testing)
  • Contamination level indicator and automatic adjustment of the alarm threshold, hence long service life
  • Airflow monitoring unit (warning threshold < 2 m/s)
  • Annual maintenance
  • Can be used with products of any make or model

Classification

  • Building inspectorate licence Z-78.6-67 from the DIBt, Berlin, Germany

Description

Variants

  • RM-O-VS-D: Duct smoke detector

Parts and characteristics

  • Duct smoke detectors with power supply unit, sensor electronics, sensor head and airflow monitor
  • Reset/Test push button
  • Signal lamp, green – operation (system monitoring)
  • Signal lamp, red – release (alarm)
  • Signal lamp, yellow – pollution (indicates contamination)
  • Signal lamp, blue – airflow (airflow monitoring)
  • Hinged cover
  • 4 cover screws

Materials and surfaces

  • Plastic casing

Standards and guidelines

  • Building inspectorate licence Z-78.6-67 from the DIBt, Berlin, Germany
  • Guideline regarding fire protection requirements on ventilation systems (Lüftungsanlagen-Richtlinie, LüAR)

Maintenance

  • The functional reliability of the duct smoke detector must be tested at least every 12 months; this has to be arranged by the owner of the ventilation system; functional tests must be carried out in compliance with the basic maintenance principles stated in EN 13306 and DIN 31051.
  • Duct smoke detectors must be included in the regular cleaning schedule of the ventilation system
  • For details on maintenance and inspection refer to the installation and operating manual

Technické údaje

  • Function
  • Technology
  • Specification text
  • Order code

Functional description

A functional test should be carried out before commissioning, then once per year and after any modification, e.g. repair.

Without smoke

Press Reset/Test push button on the duct smoke detector or in the engineering room (option). The voltage supply to the smoke detector which is attached to the fire damper or smoke protection damper is interrupted, and the damper closes as a consequence.

Once the push button has been released, the damper OPENS, either due to a spring return actuator or a pneumatic actuator.

Note: Fire dampers whose release mechanism includes electromagnets can be opened manually.

With smoke

Spray test gas into the duct through an opening right before the duct smoke detector

If the threshold value is exceeded, the voltage supply to the duct smoke detector which is attached to the fire damper or smoke protection damper is interrupted, and the damper closes as a consequence.

To re-open the damper after the sensor head has become free of smoke, press the Test/Reset push button on the duct smoke detector.

Once the push button has been released, the damper OPENS, either due to a spring return actuator or a pneumatic actuator.

Note: Fire dampers whose release mechanism includes electromagnets can be opened manually.

EC conformityLow voltage to 2006/95/EC, EMC to 2004/108/EC
Supply voltage230 V AC +10/–15 %, 50/60 Hz
Power rating6 VA max.
Micro fuseT 100 L 250 V
Protection levelIP 42
Ambient temperature0 – 60 °C
Permitted airflow velocity1 – 20 m/s
Acceptable humidity≤ 90 % relative humidity, non-condensing
Alarm threshold for volume flow rate< 2 m/s
Alarm threshold for increased contamination> 70 %
System monitoring> 90 %; no smoke detector; smoke detector data transmission error
Alarm relay contact (release, contamination)250 V 2 A, 24 V DC 100 W
WeightApprox. 1.5 kg


Duct smoke detector (smoke detection based on the principle of light scattering) to prevent smoke from spreading through the ducts of ventilation and air conditioning systems.

For controlling and releasing fire dampers and smoke protection dampers with general building inspectorate licence and fitted with an electric or electric-pneumatic release mechanism (power off to close).

Special characteristics

  • Smoke detection based on the principle of light scattering
  • For airflow velocities from 1 to 20 m/s
  • Airflow monitoring
  • With volt-free signal and alarm relays
  • Integral signal lamps
  • Choice of four airflow directions (every 90°)
  • Easily removable sensor head (simplifies functional testing)
  • Contamination level indicator and automatic adjustment of the alarm threshold, hence long service life
  • Airflow monitoring unit (warning threshold < 2 m/s)
  • Annual maintenance
  • Can be used with products of any make or model

Materials and surfaces

  • Plastic casing

Technical data

  • EC conformity: Low voltage to 2006/95/EC, EMC to 2004/108/EC
  • Supply voltage: 230 V AC +10/–15 %, 50/60 Hz
  • Power rating: ´max. 6 VA
  • Micro fuse: T 100 L 250 V
  • Protection level: IP 42
  • Ambient temperature: 0 – 60 °C
  • Airflow velocity: 1 – 20 m/s
  • Humidity: ≤ 90 % relative humidity, non-condensing
  • Alarm threshold for volume flow rate: < 2 m/s
  • Alarm threshold for increased contamination: > 70 %
  • System monitoring: > 90 %; no smoke detector; smoke detector data transmission error
  • Alarm relay contact (release, contamination): 250 V 2 A, 24 V DC 100 W
  • Weight: approx. 1.5 kg

00117988_0.
 

 Type
RM-O-VS-D       Duct smoke detector

 

Stažení

informace o produktu

certifikáty

production {"x-frame-options"=>"SAMEORIGIN", "x-xss-protection"=>"1; mode=block", "x-content-type-options"=>"nosniff", "x-download-options"=>"noopen", "x-permitted-cross-domain-policies"=>"none", "referrer-policy"=>"strict-origin-when-cross-origin", "strict-transport-security"=>"max-age=31536000; includeSubDomains", "content-type"=>"text/html; charset=utf-8"}

Sdílet stránku

Doporučit tuto stránku

Doporučit tuto stránku zasláním odkazu emailem.

Pole označená (*) jsou povinná.

Sdílet stránku

Děkujeme za doporučení!

Vaše doporučení bylo odesláno a zakrátko by mělo být doručeno.


Kontakt

Jsme tu pro vás

Uveďte prosím své sdělení a druh dotazu
Tel.: +420 283 880 380 | Fax: +420 286 881 870

Pole označená (*) jsou povinná.

Kontakt

Děkujeme vám za zprávu!

Vaše zpráva je odeslána a zakrátko bude zpracována.
Naše oddělení pro servisní dotazy se s vámi co nejrychleji spojí Pro obecné informace o výrobcích nebo o službách můžete také zavolat:
Tel.: +420 283 880 380 | Fax: +420 286 881 870

Kontakt

Jsme tu pro vás

Uveďte prosím své sdělení a druh dotazu
Tel.: +420 283 880 380 | Fax: +420 286 881 870

Attachment (max. 10MB)

Pole označená (*) jsou povinná.

Kontakt

Děkujeme vám za zprávu!

Vaše zpráva je odeslána a zakrátko bude zpracována.
Naše oddělení pro servisní dotazy se s vámi co nejrychleji spojí Pro obecné informace o výrobcích nebo o službách můžete také zavolat:
Tel.: +420 283 880 380 | Fax: +420 286 881 870